Kristi Holz FAQs

What is a Rainscreen?

A rainscreen is an exterior wall system that helps to keep buildings dry. In simple terms, a rainscreen is the space between the exterior wall of a building and the interior wall of a building (also called an air cavity) that allows for rainwater and condensation to escape before seeping into the interior wall of a building, thus avoiding moisture and mould problems inside units.

As of the year 2000 (give or take), rainscreened exteriors are required as per the BC Building Code. The design of rain screen systems and the quality of materials used has improved over the years as well.

Buildings built without a rain screen system will likely need need to install a rain screen when the exterior is eventually updated. This process can happen in stages (i.e. wall by wall) or it can happen all at one time, often including new windows, balconies, doors, etc so the entire exterior system can be tied in together. Keep in mind, many buildings experience water ingress and mould through windows so updating windows is a major aspect of ensuring the building has an airtight seal. A full rainscreen is a very expensive project, but it adds a lot of value to buildings once completed.

BEFORE A RAINSCREEN – This photo shows a 1970’s building with its original painted wood siding, original windows and original balconies.
AFTER A RAINSCREEN – This photos shows the same building after a full rainscreen, including a mix of wood, composite and metal siding, new balconies, new windows, new doors, new patios and membrane on the south side, new fencing and new concrete stairs. This was an extensive rainscreen project and cost 1 bedroom owners in the building ~$70,000 each.

In my research and review of many different strata documents and Engineer’s Report, I find many rainscreen projects are instigated when a building begins to review their balconies. Upon the Engineer’s Review, it is often determined that there is more rot than originally thought, which leads to further review and the need to do a much more all encompassing project to deal with moisture damage.

A full rainscreen project can take a long time to come to fruition. Initially, the Strata needs to procure an Engineer’s Report, which can take months to have done. Once this Engineer’s Report is received and reviewed, the Strata often needs to gather more information, including further professional opinions as well as a potential schedule and cost. Once this information has been gathered, the Strata needs to vote on the next steps at an official AGM or SGM Meeting. If the project is approved, the Strata will likely require the funds to be paid in instalments, and the work can’t often start until the Strata has enough funds to pay for the Engineering company the deposit to start the project Once the project gets going, the Engineering company will create a plan and pursue city permits for the work. Once approved, the actual work can start, which means the exterior ground level will be cleared and the scaffolding will go up and the existing exterior will be removed. The scaffolding will likely be up for 6-15 months, depending on the scope of the project. Once the exterior is done and the scaffolding comes down, there is often work to install new fencing and new landscaping, since it’s often destroyed during construction.

Rainscreen projects are very expensive for Owners, and they can be a very long process, but it’s always worth it in the end. Not only do you reclaim the value of the project if you need to sell, but you can enjoy living with a modern, worry free exterior. One issue to be aware of is once the project is announced to be in consideration, it makes the building a tough sell to potential Buyers. Not only is it harder to get financing for a mortgage (that is, until the project is done), but Buyers are weary of buying into a building where they will have to live through the work. It’s in your best interest to wait until the project is done in order to sell, if you can afford to do so.

This is a building that has a partial rainscreen. The right side of the photo shows the original exterior stucco, whereas the left side shows the new stucco clad rainscreen.